• Straight section up to 1 (or 1.5 by agreement) meter.
• Testing: electrical tests for the absence of inter-turn circuits, body insulation tests.
• Dimensions control.
• Insulation class: H (up to 180 degrees), F (up to 155 degrees).
• Manufacture lead time: from 15 calendar days.
• Build to sample.

• Manufacture either of one set or in batches.
• Use of lateral bending method, maximum width of the busbar is 100 mm.
• Vacuum pressure impregnated insulation with compounds.
• All products undergo quality control and electrical testing.
• Life cycle of minimum 15 years.

There are wire and busbar pole coils. Wire coils are produced from insulated wire, busbar coils – from bare rectangular copper wire. Stepped coils are used when there's not enough space between poles.

Busbar coils are winded using specialized machines which makes lateral bending challenging without specialized equipment. Thanks to our production capabilities, we are able to fulfill such orders with the highest possible quality. All coils are produced according to custom-made templates.

Insulation is applied to coils made of bare copper wire in accordance with technical specifications. Then the coils are impregnated with special compounds and varnishes in vacuum units. Afterwards, they are dried in special furnaces. Each manufactured coil undergoes quality control including visual inspection and inter-turn insulation testing. Coil leads are soldered with soft or hard solders in accordance with the standards.

Testing follows a pre-determined program:

• visual inspection;
• inter-turn insulation testing (performed with high frequency pulse voltages);
• testing of electrical strength of the insulation (if there is body insulation);
• DC resistance measurement.